PANEL MOUNT		ACCESSORIES
Manual reset, panel mount circuit breakers for up to 32 volts DC and 250 volts AC applications are a convenient means for protecting circuits. Mounting is 7/16-28 bushing, 1/2" long. White button, knurled nut. 1/4" push on terminals for 10 through 30 amp units, *10-32 threaded holes (screws not included) for 40 amp. Five amperage ratings.
TYPE I	TYPE II	TYPE III
Standard Automotive Type I Automatic reset circuit breakers for many 12 volt DC applications are available in your choice of metal or plastic housings with 10-32 stud terminals. These circuit breakers are available in three mounting configurations and seven amperage ratings. Conforms to SAE spec J553 Type I.	Non-cycling Type II For applications where the unit resets only when the power is removed. Conforms to SAE spec J553 Type II. For 12 Volt DC only.	Manual Reset Type III Manual reset circuit breakers are rated up to a maximum of 24 volt DC applications where the breaker has to be manually reset with the push of a button. These circuit breakers with a plastic housing are available in two mounting configurations and five amperage ratings with 10-32 stud terminals. Conforms to SAE spec J553 Type III.